Main Levels of Software Product Testing

About this sample

About this sample


Words: 887 |

Pages: 2|

5 min read

Published: Dec 12, 2018

Words: 887|Pages: 2|5 min read

Published: Dec 12, 2018

Table of contents

  1. Unit Testing
  2. Integration Testing
  3. System Testing
  4. User Acceptance Testing

Before release, any software product goes through various levels of testing to make sure that it is working properly. But, generally, software testing is divided into four levels and in this article, we will delve into the 4 main levels of testing: Unit testing, Integration testing, System testing and User acceptance testing.

'Why Violent Video Games Shouldn't Be Banned'?

Unit Testing

Unit testing (or component testing) is the first stage in the testing process. A unit is the smallest testable and independent component of the software. Normally, Unit testing is performed by software developers before handing software over to testers for executing other formal tests. The main purpose of unit testing is to make sure that every unit is working as designed.

In addition, as the cost of fixing bugs in the late stages is much higher than in the early stages, unit testing helps reduce cost by finding problems early. White box testing method is normally used at this stage.

Integration Testing

After unit testing is integration testing. In this stage, all units are integrated together and tested. It is a form of testing in the testing process performed to detect defects in the interactions and the interfaces between the integrated units. Black box testing technique is usually used at this stage, but in many cases, both Black and White testing method are combined together.

There are four main integration testing approaches, namely:

  1. Big bang: In the big bang approach, All components or modules are integrated together to complete a software system. After that, integration testing is performed.
  2. Top-down: In this method, the process is carried out from the highest level modules to the lower level ones. This method requires Test stubs, Stub is a module which will temporarily substitute for submodules if they are not available for integration during the early phases.
  3. Bottom-up: Bottom-up testing is an approach where the lowest level components are tested first, and then progressively higher level components are tested. Drivers are required in this method to simulate the main modules which are not available in the early phases.
  4. Sandwich: Sandwich testing (or Hybrid approach) is a type of integration testing which is the combination of Top-down and Bottom-up testing.

System Testing

After integration testing, the fully integrated application is tested to check that whether the system meets its software requirements specifications (SRS). System Testing is a type of black box testing method thus the knowledge of internal code is not required. This testing is performed in an environment that closely resembles production environment in order to provide more reliable and efficient outcoming. It is an important phase as it helps evaluate the functional, business and technical requirements.

There are various types of system testing:

  1. Usability Testing: Focuses on the user’s ease to operate and use and checks that the user interface is user-friendly.
  2. Load Testing: Load Testing is necessary to know that a software solution will perform under real-life loads.
  3. Regression Testing: Type of software testing that check the performance of existing functionalities when a change is made. Functional Testing: Type of black box testing that bases its test cases on the specifications of the software component under test. Recovery Testing: to test that how well a system recovers from crashes, hardware failures, or other catastrophic problems.
  4. Security Testing: To test that the system is secured enough to protect it from unintended users.
  5. Performance Testing: Performance testing is a type of testing that is performed to determine how fast and stable the system performs under a particular workload.
  6. Load Testing: Load testing is a kind of testing which determines the performance of the system under real life load conditions. It measures the maximum load capacity of the system when multiple users access the system at the same time.

User Acceptance Testing

User acceptance testing (or Beta, End-User Testing or Application) is the last phase of the testing process. The user acceptance testing is performed by end users to make sure that it can handle required tasks in real-world scenarios as per specifications. If the software product passes this stage, it means that end user has accepted it and it is ready to go live.

Get a custom paper now from our expert writers.

Below are the different types of user acceptance testing:

  1. Alpha & Beta Testing: aim to validate the fitness-for-use of the system by the business user. The user acceptance test is performed by the users and application managers.
  2. Contract Acceptance Testing: a developed software is tested against certain criteria and specifications which are predefined and agreed upon in a contract. The project team defines the relevant criteria and specifications for acceptance at the same time when the team agrees on the contract itself.
  3. Regulation Acceptance Testing: also known as Compliance Acceptance Testing, examines whether the software complies with the regulations. This includes governmental and legal regulations.
  4. Operational Acceptance Testing: also known as Operational Readiness Testing or Production Acceptance Testing, these test cases ensure there are workflows in place to allow the software or system to be used. This should include workflows for backup plans, user training, and various maintenance processes and security checks.
  5. Black Box Testing: This is a software testing method that analyses certain functionalities of the application without letting testers see the internal code structure. Black Box Testing is part of User Acceptance Testing, because Black Box Tests share the same principles as UAT. Factors affecting test scope
  • Project size.
  • The complexity of the project.
  • Budget.
  • Time scope for project.
  • Human resources.
  • Why test at different levels.
  • Software development naturally split into phases.
  • Easily track bugs.
  • Ensures a working subsystem/ component/ library.
  • Software reuse more practical.
Image of Alex Wood
This essay was reviewed by
Alex Wood

Cite this Essay

Main Levels of Software Product Testing. (2018, December 11). GradesFixer. Retrieved June 21, 2024, from
“Main Levels of Software Product Testing.” GradesFixer, 11 Dec. 2018,
Main Levels of Software Product Testing. [online]. Available at: <> [Accessed 21 Jun. 2024].
Main Levels of Software Product Testing [Internet]. GradesFixer. 2018 Dec 11 [cited 2024 Jun 21]. Available from:
Keep in mind: This sample was shared by another student.
  • 450+ experts on 30 subjects ready to help
  • Custom essay delivered in as few as 3 hours
Write my essay

Still can’t find what you need?

Browse our vast selection of original essay samples, each expertly formatted and styled


Where do you want us to send this sample?

    By clicking “Continue”, you agree to our terms of service and privacy policy.


    Be careful. This essay is not unique

    This essay was donated by a student and is likely to have been used and submitted before

    Download this Sample

    Free samples may contain mistakes and not unique parts


    Sorry, we could not paraphrase this essay. Our professional writers can rewrite it and get you a unique paper.



    Please check your inbox.

    We can write you a custom essay that will follow your exact instructions and meet the deadlines. Let's fix your grades together!


    Get Your
    Personalized Essay in 3 Hours or Less!

    We can help you get a better grade and deliver your task on time!
    • Instructions Followed To The Letter
    • Deadlines Met At Every Stage
    • Unique And Plagiarism Free
    Order your paper now